Description:
PROMOTION STORAGE PARTITION PVC/ ROOM AIR CONDITIONER BLOCKING
(Promotion PVC Folding Door / Bind)
Regular price 750 Baht Special price Recommended 530 Baht /
7 Reasons Why Our Partitions Sell So Good
1. Increase the proportion of space to save air. Adjust the home area. As you like easily.
2. Can be done immediately without any dismantling because the room divider. Easy to install.
3. Do yourself a quick, easy installation (in fully equipped kit)
4. Price (wholesale / retail)
5. Disassemble and modify.
6. Good service to build good relationships forever.
7. Delivery service throughout Thailand free delivery (Bangkok metropolitan area) outside the delivery area as a destination pickup.
PVC Partition Room (cheap + easy + sensitive)
Contact: Customer Service (Nationwide delivery! )
Call 02-463-8056 (auto)
During office hours Mon - Fri 8.30-17.30
Line: @furnitagethailand
hotline
(095) 585 6646
(083) 6549989
(061) 661 9198 Water
(095) 461 4464
How to calculate the barrier price.
1. standard height The room dividers are available in 7 sizes (2 / 2.2 / 2.4 / 2.6 / 2.8 / 3.0 / 3.2 / 3.4 / 3.6 meters)
By the way, the square is as follows.
Wide (true Units in meters) X Height (standard height selection) x 1.2 = square yards
a sample
Width 4.5 x height 2.55
Remove the width of 4.50 x standard height 2.60 (requires standard height. Then cut to the actual size.
So will the number of yards. 11.7 square yards, but calculated to 12 square yards.
Price 530 baht / square yard. Partition 12 * 530 = 6360 baht (curtain + rails + accessories).
accessory
Lock key 500 THB / set
- Installment fee 200 baht / square yard (minimum starting at 2,000 baht)
How to order a partition.
1. Measure the size, width and height (cm).
2. Choose the color PVC curtains.
3. Choose curtain opening position.
(Select from left ---> right or open left, right, left)
4. Call the address 02 463 8056 Automatic lineid: thaiboffo
5. Wait for your goods at home (up to 4 days after transfer money)
Note: Height measurement Should be measured at several altitudes. The stiffness of the vertical mounting. Until the exact value. And inform the staff with the lowest altitude. Because the factory will calculate the cut leaves the scene from the floor about 1-2 cm for beauty)
Contact: Customer Service (Nationwide delivery! )
Call 02-463-8056 (auto)
During office hours Mon - Fri 8.30-17.30
hotline
(095) 585 6646
(083) 6549989
(061) 661 9198 Water
(095) 461 4464
How to install a self-contained partition
Steps and how to set up a partition
1. Measure the exact width for rail mounting.
2. Take the rails at the factory (usually to come) to cut to the actual width.
3. Partition room to drill holes.
4. Remove the track, then mark the position with a pencil to the hole.
5. (in case of mortar), drill the mortar at the marking position, then use the burial board and use the hammer to complete the hammer (if it is smooth). Use butterfly book embedded and pushed to sink. May need to increase the clamping distance over the mortar. For strength)
6. Raise the vertical part of the room by placing the wheel of the room divider on the top and using the wheel to slide one by one.
7. Bring the prepared nut to the rail and secure it to the beam by using a drill or screwdriver one by one.
8. Drill a hole in the back of the room block about 4-5 holes.
9. Use a pencil to mark the hole. Then use a drill drill with the book to complete.
10. Apply the screwdriver or screwdriver to the attachment plate using the prepared screw and secure the back of the partition (complete on both sides).
11. Insert the magnetic pole against the front of the partition and use a small screwdriver to tighten the nuts. Equipped with handles This is a complete compression.
Contact: Customer Service (Nationwide delivery! )
Call 02-463-8056 (auto)
During office hours Mon - Fri 8.30-17.30
hotline
(095) 585 6646 Nicc
(083) 6549989 Ae
(061) 661 9198 Num
(095) 461 4464 Aum